{"title":"Metrology 3D Scanners","description":"","products":[{"product_id":"artec-spider-ii","title":"Artec Spider II","description":"\u003cp\u003eArtec Spider II is a high-resolution blue-light 3D scanner for industrial reverse engineering and inspection of small and medium parts. It captures sharp edges, deep holes and fine texture at 0.05 mm, in full color and without targets.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Spider II\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail you can measure.\u003c\/strong\u003e 0.05 mm resolution and accuracy resolve machined edges, fillets, casting textures, part numbers and engravings, the features that decide whether a CAD model or an inspection report is right.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwice the resolution, four times the speed\u003c\/strong\u003e of its predecessor, Space Spider, with 30 fps real-time fusion and up to 8 million points\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo targets, no part prep.\u003c\/strong\u003e Hybrid geometry and texture tracking means nothing is stuck on the part, so scanning starts at once, even where targets are not allowed, such as finished surfaces, medical devices or museum pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles difficult surfaces.\u003c\/strong\u003e Black, shiny, thin and deep features come out clean, and fast temperature stabilization gives repeatable results from the first scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight into engineering.\u003c\/strong\u003e Scan-to-CAD and inspection tools in Artec Studio, data that merges with any other Artec scanner, and true-to-life 5 MP color.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eSpider II is at its best on parts where every detail counts and the data goes straight into engineering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse engineering of small and medium parts.\u003c\/strong\u003e Legacy components with no drawings and worn or broken parts go to accurate CAD in hours, ready for remanufacturing or redesign.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality inspection against CAD.\u003c\/strong\u003e Castings, machined and molded parts and 3D-printed batches are compared with the nominal model over the full surface, not at a few points, so deviations show up before parts move on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct development.\u003c\/strong\u003e Prototypes, molds, packaging and consumer products: designers start from real geometry and get parts that fit first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedicine, science and heritage.\u003c\/strong\u003e Prosthetics, implants, fossils and museum pieces are captured contact-free in full color, with no markers on patients or fragile objects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e2-year manufacturer warranty.\u003c\/p\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871600845131,"sku":"ARTEC_SPIDER_II","price":29700.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/spider-ii-main.png?v=1793842103"},{"product_id":"artec-point","title":"Artec Point II","description":"\u003cp\u003eArtec Point II is a metrology-grade blue-laser handheld scanner for quality control and reverse engineering. It delivers ISO 17025-accredited accuracy of up to 0.02 mm in a 570 g body that handles black and shiny parts.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Point II\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy you can document.\u003c\/strong\u003e Up to 0.02 mm point accuracy and 0.015 mm + 0.035 mm\/m volumetric accuracy, accredited to ISO 17025 based on VDI\/VDE 2634. Every unit is calibrated and tested in an accredited lab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree laser modes, one click.\u003c\/strong\u003e 54 blue laser lines for fast coverage of large parts, 17 parallel lines for fine detail such as engravings, and a single line for deep holes and grooves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast and steady.\u003c\/strong\u003e 5.8 million measurements\/s, more than twice the original Artec Point, and 120 fps tracking that stays locked through quick moves across a scanning area of up to 700 × 600 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack, shiny and complex surfaces.\u003c\/strong\u003e The blue laser captures shiny machined metal, airfoils and black parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the shop floor.\u003c\/strong\u003e 570 g, one-handed, IP50 and accurate from −10 to 40 °C. A dedicated interface gives repeatable results whatever the operator's experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003ePoint II is a laser metrology tool for the shop floor: the right choice when parts are prepared with reference targets and every reading has to stand up in a quality report.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst-article and incoming inspection.\u003c\/strong\u003e Castings, machined and injection-molded parts are compared with CAD, and results are documented against ISO 17025-accredited accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse engineering of metal parts.\u003c\/strong\u003e Turbine impellers, oil pumps, transmissions and cam gears go to CAD with sharp edges and deep holes intact, ready for remanufacturing or redesign.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge panels and molds.\u003c\/strong\u003e The 54-line mode covers automotive hoods, door panels and spoilers quickly. Add Artec Metrology Kit to hold 0.015 mm + 0.015 mm\/m across large parts and molds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance, repair and retrofit.\u003c\/strong\u003e Worn, obsolete or damaged parts in energy, heavy industry and aerospace, from piston heads and offshore pipe fittings to airfoils, scanned and checked against CAD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed target-free scanning or color on the same kind of parts? Artec Neo delivers metrology-grade accuracy with blue structured light, using targets only where tolerances demand them.\u003c\/p\u003e\n\u003cp\u003e1-year manufacturer warranty.\u003c\/p\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871600877899,"sku":"ARTEC_POINT","price":23900.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/product-point-port.png?v=1793894136"},{"product_id":"artec-micro-ii","title":"Artec Micro II","description":"\u003cp\u003eArtec Micro II is a fully automated desktop 3D scanner for small, intricate parts. Place the object, press one button and get a full-color model with metrology-grade accuracy of up to 5 microns.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Micro II\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne click, no expertise needed.\u003c\/strong\u003e Smart algorithms move the object along the ideal path so every side gets covered, with consistent results whoever runs the scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified precision.\u003c\/strong\u003e Up to 5 µm accuracy and 2 µm repeatability, certified to ISO 12836.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSees into recesses.\u003c\/strong\u003e Four 13 MP cameras look into holes and grooves and around sharp edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor included.\u003c\/strong\u003e Native full-color capture, plus photo texturing in Artec Studio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight to CAD and inspection.\u003c\/strong\u003e Fit primitives, compare against CAD and export to SOLIDWORKS or Geomagic Control X.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eMicro II is a metrology instrument for small parts: load the part, press one button and get certified micron-level data, with no expert needed at the controls.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection of small precision parts.\u003c\/strong\u003e Connectors, valves, watch components, small castings and machined parts are compared with CAD down to the micron, with the same result whoever runs the scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse engineering of small, complex parts.\u003c\/strong\u003e Deep recesses, sharp edges and tiny features go straight to CAD for redesign or remanufacturing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDental and medical.\u003c\/strong\u003e Crowns, bridges, implants and lab research, with accuracy certified to ISO 12836, the accuracy standard for dental CAD\/CAM scanners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry and small collections.\u003c\/strong\u003e Rings, gem settings, coins, shells and small bones digitized in full color for redesign, replicas and archives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e2-year manufacturer warranty.\u003c\/p\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871600976203,"sku":"ARTEC_MICRO_II","price":24240.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/micro-ii.png?v=1793842103"},{"product_id":"artec-metrology-kit-professional","title":"Artec Metrology Kit: Professional","description":"\u003cp\u003eArtec Metrology Kit Professional is a DAkkS-certified photogrammetry system that measures with up to 2-micron accuracy. Use it on its own, or as a reference frame that gives your Artec scanner metrology-grade accuracy on large parts.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Metrology Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo tools in one.\u003c\/strong\u003e Measure points and features directly for inspection and deformation analysis, or create a reference target cloud so a handheld scanner keeps its accuracy across several meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFar less error over distance.\u003c\/strong\u003e Combined with a scanner, it reaches 15 µm + 15 µm\/m volumetric accuracy. Artec rates this up to 3× more accurate than a scanner alone across 1 m, and up to 14× across 15 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA certified system.\u003c\/strong\u003e The DAkkS certificate covers the sensor and scale bars, certified to VDI\/VDE 2634 Part 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasures moving objects.\u003c\/strong\u003e 6DoF dynamic referencing works on unstable setups, and short measuring times suit climate chambers and test rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable.\u003c\/strong\u003e The whole kit fits in one rugged case with a trolley, for the workshop, on site or outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne software environment.\u003c\/strong\u003e The Metrology Kit plugin for Artec Studio, compatible with Geomagic Control X and PolyWorks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eThe Professional kit is for large, complex parts where micron-level accuracy has to hold across several meters, in the lab, on the shop floor or out in the field.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection of large parts.\u003c\/strong\u003e Points, features and hole positions measured directly and compared with CAD on car bodies, aerospace structures, and wind-energy and rail components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeformation analysis.\u003c\/strong\u003e Short measuring times and 6DoF dynamic referencing show how parts move and deform in climate chambers and on test rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReferencing for Artec scanners.\u003c\/strong\u003e A precise target frame lets Leo, Eva or Space Spider keep metrology accuracy across parts several meters long.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning and alignment.\u003c\/strong\u003e Sensors, fixtures and robots located precisely in a part's or vehicle's coordinate system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Metrology Kit users report\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOffshore flanges in the North Sea and the Baltic measured in full on site in 60 minutes.\u003c\/li\u003e\n\u003cli\u003eA car maker checks welding-stud positions on every fourth chassis and feeds the results straight into welding-robot programming.\u003c\/li\u003e\n\u003cli\u003eAutonomous-driving R\u0026amp;D teams use it to place sensors precisely in the vehicle's coordinate system.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871601041739,"sku":"ARTEC_METROLOGY_KIT_PROFESSIONAL","price":42700.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/metrology-kit.png?v=1793842530"},{"product_id":"artec-metrology-kit-entry","title":"Artec Metrology Kit: Entry","description":"\u003cp\u003eArtec Metrology Kit Entry brings certified photogrammetry to everyday engineering. Measure with up to 4-micron accuracy, or lock your Artec scanner to a precise reference frame on large parts, at an entry price.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Metrology Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo tools in one.\u003c\/strong\u003e Measure points and features directly for inspection and deformation analysis, or create a reference target cloud so a handheld scanner keeps its accuracy across several meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess error over distance.\u003c\/strong\u003e Combined with Artec Leo or Eva, volumetric accuracy reaches 0.125 mm + 0.025 mm\/m, so error doesn't build up scan by scan on large parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA certified system.\u003c\/strong\u003e The DAkkS certificate covers the complete measuring system, including the scale cross and the sensor. VDI\/VDE 2634 Part 1 certification is available as an option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasures moving objects.\u003c\/strong\u003e 6DoF dynamic referencing works on unstable setups, and short measuring times suit climate chambers and test rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable.\u003c\/strong\u003e The whole kit fits in one robust case, for the workshop, on site or outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne software environment.\u003c\/strong\u003e The Metrology Kit plugin for Artec Studio, compatible with Geomagic Control X and PolyWorks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eThe Entry kit brings certified photogrammetry to everyday engineering: inspection of large parts and reliable accuracy for Artec Leo and Eva scans over several meters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection of large parts.\u003c\/strong\u003e Points, features and hole positions measured directly and compared with CAD on car bodies, aerospace structures, and wind-energy and rail components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeformation analysis.\u003c\/strong\u003e Short measuring times and 6DoF dynamic referencing show how parts move and deform in climate chambers and on test rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReferencing for Artec scanners.\u003c\/strong\u003e A precise target frame lets Leo or Eva reach 0.125 mm + 0.025 mm\/m on large parts, so error does not build up scan by scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning and alignment.\u003c\/strong\u003e Sensors, fixtures and robots located precisely in a part's or vehicle's coordinate system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Metrology Kit users report\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOffshore flanges in the North Sea and the Baltic measured in full on site in 60 minutes.\u003c\/li\u003e\n\u003cli\u003eA car maker checks welding-stud positions on every fourth chassis and feeds the results straight into welding-robot programming.\u003c\/li\u003e\n\u003cli\u003eAutonomous-driving R\u0026amp;D teams use it to place sensors precisely in the vehicle's coordinate system.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871601074507,"sku":"ARTEC_METROLOGY_KIT_ENTRY","price":27400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/artec-metrology-kit-entry.png?v=1793842105"},{"product_id":"artec-spider-ii-premium-pack","title":"Artec Spider II Premium Pack","description":"\u003cp\u003eThe Artec Spider II Premium Pack adds a battery and the Artec Turntable to Spider II, with five years of Artec Studio, a 5-year warranty and a 5-year Hot Swap contract, for fast, repeatable scanning of small parts.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArtec Spider II 3D scanner\u003c\/li\u003e\n\u003cli\u003eBattery for scanning away from the mains\u003c\/li\u003e\n\u003cli\u003eArtec Turntable, synchronized with Artec Studio for automated, target-free capture of small objects\u003c\/li\u003e\n\u003cli\u003eArtec Studio subscription for 5 years\u003c\/li\u003e\n\u003cli\u003eWarranty for 5 years\u003c\/li\u003e\n\u003cli\u003eHot Swap contract for 5 years\u003c\/li\u003e\n\u003cli\u003eAccess to the Artec Academy platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster series work.\u003c\/strong\u003e The Turntable turns the part in sync with the scan, so small parts are captured in one go with the same setup every time: ideal for batches to inspect or many parts to reverse engineer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan where the part is.\u003c\/strong\u003e The battery frees Spider II from the socket on the shop floor, on site or in a museum store room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive years covered in one order.\u003c\/strong\u003e Every Artec Studio release, a 5-year warranty and a 5-year Hot Swap contract, with nothing to renew or extend along the way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for\u003c\/strong\u003e labs and workshops that scan many small and medium parts: reverse engineering, inspection of castings and 3D-printed batches, product design, jewelry and dental. If you mostly scan large parts by hand and already have Artec Studio, the scanner alone may be enough.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Artec Spider II\u003c\/h3\u003e\n\u003cp\u003eArtec Spider II is a high-resolution blue-light 3D scanner for industrial reverse engineering and inspection of small and medium parts. It captures sharp edges, deep holes and fine texture at 0.05 mm, in full color and without targets.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Spider II\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail you can measure.\u003c\/strong\u003e 0.05 mm resolution and accuracy resolve machined edges, fillets, casting textures, part numbers and engravings, the features that decide whether a CAD model or an inspection report is right.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwice the resolution, four times the speed\u003c\/strong\u003e of its predecessor, Space Spider, with 30 fps real-time fusion and up to 8 million points\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo targets, no part prep.\u003c\/strong\u003e Hybrid geometry and texture tracking means nothing is stuck on the part, so scanning starts at once, even where targets are not allowed, such as finished surfaces, medical devices or museum pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles difficult surfaces.\u003c\/strong\u003e Black, shiny, thin and deep features come out clean, and fast temperature stabilization gives repeatable results from the first scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight into engineering.\u003c\/strong\u003e Scan-to-CAD and inspection tools in Artec Studio, data that merges with any other Artec scanner, and true-to-life 5 MP color.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eSpider II is at its best on parts where every detail counts and the data goes straight into engineering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse engineering of small and medium parts.\u003c\/strong\u003e Legacy components with no drawings and worn or broken parts go to accurate CAD in hours, ready for remanufacturing or redesign.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality inspection against CAD.\u003c\/strong\u003e Castings, machined and molded parts and 3D-printed batches are compared with the nominal model over the full surface, not at a few points, so deviations show up before parts move on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct development.\u003c\/strong\u003e Prototypes, molds, packaging and consumer products: designers start from real geometry and get parts that fit first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedicine, science and heritage.\u003c\/strong\u003e Prosthetics, implants, fossils and museum pieces are captured contact-free in full color, with no markers on patients or fragile objects.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871601172811,"sku":"ARTEC_SPIDER_II_PREMIUM_PACK","price":39950.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/spider-ii-premium-pack.png?v=1793973698"},{"product_id":"artec-micro-ii-premium-pack","title":"Artec Micro II Premium Pack","description":"\u003cp\u003eThe Artec Micro II Premium Pack is Micro II with five years of Artec Studio, a 3-year warranty instead of two and access to the Artec Academy platform.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArtec Micro II desktop 3D scanner\u003c\/li\u003e\n\u003cli\u003eArtec Studio subscription for 5 years\u003c\/li\u003e\n\u003cli\u003eWarranty for 3 years\u003c\/li\u003e\n\u003cli\u003eAccess to the Artec Academy platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlways the latest algorithms.\u003c\/strong\u003e Artec Studio gets a new version every year; with five years included, Micro II keeps improving with every release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA longer warranty\u003c\/strong\u003e: three years instead of the standard two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredictable costs\u003c\/strong\u003e for years of daily use as a measuring instrument, with no separate software renewals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for\u003c\/strong\u003e labs that run Micro II every day: dental labs, jewelry workshops, small-parts quality control and research. For occasional use, or if you already have an Artec Studio license, the scanner alone may be enough.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Artec Micro II\u003c\/h3\u003e\n\u003cp\u003eArtec Micro II is a fully automated desktop 3D scanner for small, intricate parts. Place the object, press one button and get a full-color model with metrology-grade accuracy of up to 5 microns.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Micro II\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne click, no expertise needed.\u003c\/strong\u003e Smart algorithms move the object along the ideal path so every side gets covered, with consistent results whoever runs the scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified precision.\u003c\/strong\u003e Up to 5 µm accuracy and 2 µm repeatability, certified to ISO 12836.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSees into recesses.\u003c\/strong\u003e Four 13 MP cameras look into holes and grooves and around sharp edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor included.\u003c\/strong\u003e Native full-color capture, plus photo texturing in Artec Studio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight to CAD and inspection.\u003c\/strong\u003e Fit primitives, compare against CAD and export to SOLIDWORKS or Geomagic Control X.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eMicro II is a metrology instrument for small parts: load the part, press one button and get certified micron-level data, with no expert needed at the controls.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection of small precision parts.\u003c\/strong\u003e Connectors, valves, watch components, small castings and machined parts are compared with CAD down to the micron, with the same result whoever runs the scan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse engineering of small, complex parts.\u003c\/strong\u003e Deep recesses, sharp edges and tiny features go straight to CAD for redesign or remanufacturing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDental and medical.\u003c\/strong\u003e Crowns, bridges, implants and lab research, with accuracy certified to ISO 12836, the accuracy standard for dental CAD\/CAM scanners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry and small collections.\u003c\/strong\u003e Rings, gem settings, coins, shells and small bones digitized in full color for redesign, replicas and archives.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57871601336651,"sku":"ARTEC_MICRO_II_PREMIUM_PACK","price":32940.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/premium-micro-ii-main.png?v=1793973698"},{"product_id":"artec-spider-ii-education-package","title":"Artec Spider II Education Package","description":"\u003cp\u003eThe Artec Spider II Education Package brings high-resolution blue-light 3D scanning to engineering labs, design schools and research groups, with classroom software licenses, two years of upgrades and accidental damage cover at an academic price.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArtec Spider II high-resolution 3D scanner\u003c\/li\u003e\n\u003cli\u003eArtec Studio license, plus free additional licenses for classroom use\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003cli\u003e2 years of free major Artec Studio upgrades\u003c\/li\u003e\n\u003cli\u003e2 years of Artec Care: accidental damage protection and fixed repair costs\u003c\/li\u003e\n\u003cli\u003e2 years of access to selected Artec Academy online courses marked EDU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Spider II for teaching and research\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail you can measure.\u003c\/strong\u003e 0.05 mm resolution and accuracy resolve edges, engravings, teeth and fossil textures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing stuck on the object.\u003c\/strong\u003e Target-free tracking means no markers or powder on borrowed specimens, museum pieces or patients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeaches the industry workflow.\u003c\/strong\u003e Reverse engineering and inspection tools in Artec Studio, and data that goes straight into Geomagic Design X, Control X or SOLIDWORKS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriendly for occasional users.\u003c\/strong\u003e Real-time feedback shows coverage as you scan, so students and researchers new to 3D scanning get clean results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull color.\u003c\/strong\u003e 5 MP texture for teaching models, online collections and VR.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow universities use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering and manufacturing courses.\u003c\/strong\u003e Students reverse engineer worn or legacy parts into CAD and inspect 3D-printed and machined parts against the nominal model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct and industrial design.\u003c\/strong\u003e Prototypes and consumer products are scanned so design projects start from real geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarth sciences and paleontology.\u003c\/strong\u003e A geology department scans rock specimens with Spider II to pick up fine geological detail for its VR teaching materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuseums, heritage, medicine and dentistry.\u003c\/strong\u003e Small artifacts, bones, teeth and implants are captured contact-free in full color; a historic ring was scanned, cleaned up and delivered for replication in about an hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to order.\u003c\/strong\u003e Education Packages are for schools, universities and research institutes. Request a quote and we will confirm eligibility, pricing and delivery. We can also add Geomagic Design X, Control X or Freeform for engineering and design courses, or put together a package with several scanners for a lab.\u003c\/p\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":57876160086347,"sku":"ARTEC_SPIDER_II_EDUCATION_PACKAGE","price":28060.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/artec-spider-ii-main.png?v=1793973701"},{"product_id":"artec-neo","title":"Artec Neo","description":"\u003cp\u003eArtec Neo is a wireless hybrid 3D scanner that brings metrology and speed together: 0.025 mm accuracy with targets where tolerances matter and 0.05 mm target-free everywhere else, in one scan and in full color.\u003c\/p\u003e\n\u003ch3\u003eWhy Artec Neo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargets only where you need them.\u003c\/strong\u003e Neo switches automatically between target-based and target-free tracking within a single part, so you prepare datums and fits, not the whole surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetrology without the wait.\u003c\/strong\u003e Blue structured light captures a whole area in every frame, at up to 8 million points\/s. Artec rates the complete workflow up to 2× faster than with a metrology-grade laser scanner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified in an accredited lab.\u003c\/strong\u003e Every unit is verified in Artec’s ISO\/IEC 17025-accredited independent metrology laboratory in accordance with VDI\/VDE 2634 Part 3 — so you can make critical measurement decisions with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable-free.\u003c\/strong\u003e Built-in battery and Wi-Fi, with four batteries in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail and color.\u003c\/strong\u003e 0.05 mm resolution reaches into deep holes and channels, while 5 MP texture shows part numbers, casting marks and surface condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it shines\u003c\/h3\u003e\n\u003cp\u003eNeo is built for metrology work where tolerances are tight but time on the part is limited: target accuracy where it matters, target-free speed everywhere else.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst-article and incoming inspection.\u003c\/strong\u003e Full target coverage holds 0.025 mm + 0.035 mm\/m over the whole surface, with lab-verified accuracy behind every report.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse engineering and validation.\u003c\/strong\u003e Targets go only around datums, fits and interfaces; the rest of the part is captured target-free, so preparation takes minutes, not hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly, installation and retrofit.\u003c\/strong\u003e A target trail links features several meters apart, such as flanges, bolt circles and mounting points, for machine installation and fit checks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-site inspection and MRO.\u003c\/strong\u003e Pumps, impellers, castings, panel gaps and aircraft surfaces are scanned where they are, wirelessly and without markers on the aircraft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePair it with Artec Leo for large surfaces and merge everything in one Artec Studio project.\u003c\/p\u003e\n\u003cp\u003e2-year manufacturer warranty.\u003c\/p\u003e","brand":"Artec 3D","offers":[{"title":"Default Title","offer_id":59130553237835,"sku":"ARTEC_NEO","price":35100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/2565\/5371\/files\/neo-main.png?v=1793842104"}],"url":"https:\/\/3d-scanners.com\/collections\/metrology-3d-scanners.oembed","provider":"Artec 3D","version":"1.0","type":"link"}