Artec 3D New
Artec Neo
35 100 €
Ceny jsou bez DPH a bez sales tax. Doprava se vypočítá při placení.
Artec Neo is a wireless hybrid 3D scanner that brings metrology and speed together: 0.025 mm accuracy with targets where tolerances matter and 0.05 mm target-free everywhere else, in one scan and in full color.
Key specs
All tech specs- AccuracyHow close each measured point is to its true position. Smaller is better.
- Up to 0.025 mm
- ResolutionThe finest detail the scanner captures: the distance between neighbouring points. Smaller is better.
- 0.05 mm
- SpeedHow many 3D points the scanner records per second. Higher means shorter scanning sessions.
- Up to 8 mln points/s
- TrackingHow the scanner keeps track of its position. Target-free means no stickers on the part and no preparation.
- Hybrid, targets optional
- VerificationAccuracy is verified against an international standard or by an accredited calibration lab.
- Accredited lab, VDI/VDE 2634-3
- Official Artec 3D store — full manufacturer warranty
- Shipping to all EU countries and the US
- Expert support before and after purchase
Why Artec Neo
- Targets only where you need them. Neo switches automatically between target-based and target-free tracking within a single part, so you prepare datums and fits, not the whole surface.
- Metrology without the wait. Blue structured light captures a whole area in every frame, at up to 8 million points/s. Artec rates the complete workflow up to 2× faster than with a metrology-grade laser scanner.
- Verified in an accredited lab. Every unit is verified in Artec’s ISO/IEC 17025-accredited independent metrology laboratory in accordance with VDI/VDE 2634 Part 3 — so you can make critical measurement decisions with confidence.
- Cable-free. Built-in battery and Wi-Fi, with four batteries in the box.
- Detail and color. 0.05 mm resolution reaches into deep holes and channels, while 5 MP texture shows part numbers, casting marks and surface condition.
Where it shines
Neo is built for metrology work where tolerances are tight but time on the part is limited: target accuracy where it matters, target-free speed everywhere else.
- First-article and incoming inspection. Full target coverage holds 0.025 mm + 0.035 mm/m over the whole surface, with lab-verified accuracy behind every report.
- Reverse engineering and validation. Targets go only around datums, fits and interfaces; the rest of the part is captured target-free, so preparation takes minutes, not hours.
- Assembly, installation and retrofit. A target trail links features several meters apart, such as flanges, bolt circles and mounting points, for machine installation and fit checks.
- On-site inspection and MRO. Pumps, impellers, castings, panel gaps and aircraft surfaces are scanned where they are, wirelessly and without markers on the aircraft.
Pair it with Artec Leo for large surfaces and merge everything in one Artec Studio project.
2-year manufacturer warranty.
Resolution & accuracy
| Accuracy (with targets) | 0.025 mm |
|---|---|
| Volumetric accuracy (with targets) | 0.025 mm + 0.035 mm/m |
| Accuracy (without targets) | 0.050 mm |
| Volumetric accuracy (without targets) | 0.050 mm + 0.3 mm/m |
| Mesh resolution | 0.050 mm |
| Acceptance test | VDI/VDE 2634 Part 3, in an ISO/IEC 17025-accredited lab* |
Scanning range
| Size of scanning object/area | S – M |
|---|---|
| Working distance | 0.19 – 0.3 m |
| Volume capture zone | 1,800 cm³ |
| Linear field of view H×W @ closest range | 128 × 104 mm |
| Linear field of view H×W @ furthest range | 171 × 152 mm |
| Depth of field | 110 mm |
Speed
| 3D reconstruction rate for real-time fusion, up to | 15 fps |
|---|---|
| Data acquisition speed, up to | 8 mln points/second |
Scanning algorithms
| Target compatibility | ✓ |
|---|---|
| Target-free geometry and texture tracking | ✓ |
| Hybrid (target & target-free) 3D scanning mode | ✓ |
Texture
| Texture resolution | 5 MP |
|---|---|
| Colors | 24 bpp |
Hardware
| Scanner type | Handheld |
|---|---|
| Power source | AC/DC power adapter, DC 24V |
| Interface | Compatible with Thunderbolt 4, Wi-Fi |
| 3D structured-light source | 450 nm, blue LED |
| Texture illumination source | White LED CRI > 95, color temperature 4000 K |
| Dimensions H×D×W | 187 × 156 × 118 mm |
| Weight | 1.3 kg (with batteries) |
| Warranty | 2 years |
Compatibility
| Supported OS | Windows 11 |
|---|---|
| Recommended computer parameters | 13th or 14th Gen Intel Core i7 or i9 processors, RTX 4070 8 GB |
| Minimum computer requirements | 12th Gen Intel Core i9 processor, RTX 4060 8 GB |
Output formats
| 3D mesh | OBJ, PLY, WRL, STL, AOP, ASC, PTX, E57, XYZRGB |
|---|---|
| CAD | STEP, IGES, X_T |
| Measurements | CSV, DXF, XML |
* Artec 3D’s metrology and calibration laboratory, accredited by OLAS, Luxembourg’s national accreditation body.
Artec Neo is a new product, and it’s continuously being improved, so its specifications may change over time. Artec 3D reserves the right to update these specifications.
Recenze zákazníků
Zatím žádné recenze — podělte se o svou zkušenost jako první.
New
