Handheld 3D scanners that capture faces, limbs and whole bodies contact-free and in full color, for custom medical devices, research and teaching.
Eva and Leo cover most medical scanning, from faces to full bodies. Spider II adds fine detail on small areas and devices.
Faces, residual limbs, feet and torsos for custom devices and research
Artec Eva9.900 €
Full bodies, legs, torsos and anatomical specimens, in wards or remote sites
Artec Leo34.800 €
Small body areas, specimens, implants and medical equipment
Artec Spider II27.000 €
One workflow in Artec Studio Pro, whichever scanner you choose.
Capture a face, limb or torso in minutes with live feedback. Nothing touches the skin: no plaster, no markers.
Artec Studio aligns and fuses the scans into a watertight, full-color model and compensates for small patient movements.
Take sections and distances, or align scans from different visits and compare them with distance maps to see what changed.
Export STL, OBJ or CAD formats to your design software, then 3D print or mill the custom device.
A face, a full body and a human skeleton: anatomy captured contact-free and in color, in minutes. Spin any model and zoom in.
A full face in under a minute, for maxillofacial and plastic surgery planning.
100+
Children’s burned faces are scanned contact-free instead of plaster-cast, and masks are 3D printed within hours. Over 100 masks were made in one year, unachievable with plaster methods.
Scanned withArtec Eva
<1%
A university group scanned volunteers for breast health and bra-fit research. Maximum volume error was 0.8%, and repeat calculations agreed within 1 ml.
Scanned withArtec Eva
Plaster casting is slow and messy, and hard on children and burn patients. Eva captures a residual limb in minutes instead of a casting session that can run for hours, and one burn-care team made more than 100 custom compression masks in a year from face scans, which plaster methods could not achieve.
The model is stored digitally, so there are no plaster positives to keep and a repeat device starts from the saved scan. Artec Studio compensates for small patient movements during capture.
Artec Eva suits faces, limbs and torsos and is the most common starting point. Artec Leo is fully wireless, so you can walk around a patient or a full body without a laptop. Artec Spider II adds 0.05 mm detail for small body areas, specimens and medical equipment.
Scanning is contact-free and nothing is stuck on the skin. Eva uses white structured light that is safe for people, Spider II an eye-safe blue LED, and Leo an invisible Class 1 laser pattern.
Users report a residual limb in under a minute with Eva, and a full body takes a few minutes. Patients should hold still, but Artec Studio can compensate for small movements.
Yes. Scans taken before and after treatment, or in different body positions, can be aligned in Artec Studio and compared with distance maps. Research teams have used this to track soft-tissue changes.
Artec Studio exports meshes as STL, OBJ or PLY for design software and 3D printing, and STEP, IGES or X_T for CAD. Premium Packs include five years of Artec Studio.
Yes. Book a demo and an Artec 3D expert will show scanning and processing on cases like yours and help you choose the right scanner.
Yes. Eva captures a torso or limb in minutes, contact-free, so compression garments can be designed on the scan instead of on tape measurements. Export OBJ or STL to your garment design software.
Yes. Eva weighs under 1 kg and works from a tablet with the optional battery pack for up to 6 hours, and Leo has its own battery, computer and screen, so no laptop is needed.
In our store, Artec Eva is 9.900 €, Artec Spider II is 27.000 € and Artec Leo is 34.800 €. Premium Packs add five years of Artec Studio and a 5-year warranty.
