Artec Spider II Premium Pack

What's in the pack

• Artec Spider II 3D scanner
• Battery for scanning away from the mains
• Artec Turntable, synchronized with Artec Studio for automated, target-free capture of small objects
• Artec Studio subscription for 5 years
• Warranty for 5 years
• Hot Swap contract for 5 years
• Access to the Artec Academy platform

Why choose the pack

• Faster series work. The Turntable turns the part in sync with the scan, so small parts are captured in one go with the same setup every time: ideal for batches to inspect or many parts to reverse engineer.
• Scan where the part is. The battery frees Spider II from the socket on the shop floor, on site or in a museum store room.
• Five years covered in one order. Every Artec Studio release, a 5-year warranty and a 5-year Hot Swap contract, with nothing to renew or extend along the way.
• Best for labs and workshops that scan many small and medium parts: reverse engineering, inspection of castings and 3D-printed batches, product design, jewelry and dental. If you mostly scan large parts by hand and already have Artec Studio, the scanner alone may be enough.

About Artec Spider II

Artec Spider II is a high-resolution blue-light 3D scanner for industrial reverse engineering and inspection of small and medium parts. It captures sharp edges, deep holes and fine texture at 0.05 mm, in full color and without targets.

Why Artec Spider II

• Detail you can measure. 0.05 mm resolution and accuracy resolve machined edges, fillets, casting textures, part numbers and engravings, the features that decide whether a CAD model or an inspection report is right.
• Twice the resolution, four times the speed of its predecessor, Space Spider, with 30 fps real-time fusion and up to 8 million points/s.
• No targets, no part prep. Hybrid geometry and texture tracking means nothing is stuck on the part, so scanning starts at once, even where targets are not allowed, such as finished surfaces, medical devices or museum pieces.
• Handles difficult surfaces. Black, shiny, thin and deep features come out clean, and fast temperature stabilization gives repeatable results from the first scan.
• Straight into engineering. Scan-to-CAD and inspection tools in Artec Studio, data that merges with any other Artec scanner, and true-to-life 5 MP color.

Where it shines

Spider II is at its best on parts where every detail counts and the data goes straight into engineering.

• Reverse engineering of small and medium parts. Legacy components with no drawings and worn or broken parts go to accurate CAD in hours, ready for remanufacturing or redesign.
• Quality inspection against CAD. Castings, machined and molded parts and 3D-printed batches are compared with the nominal model over the full surface, not at a few points, so deviations show up before parts move on.
• Product development. Prototypes, molds, packaging and consumer products: designers start from real geometry and get parts that fit first time.
• Medicine, science and heritage. Prosthetics, implants, fossils and museum pieces are captured contact-free in full color, with no markers on patients or fragile objects.