Handheld 3D scanners for parts, people and large objects, from 0.02 mm metrology on machined metal to wireless capture of whole vehicles on site.
Object size, tolerance and where you scan decide it. Start from the objects you capture most often.
Machined and cast parts, molded plastics, engravings, prototypes
Artec Spider II27.000 €
First articles, castings, impellers, jigs, fixtures and panel gaps
Artec Neo35.100 €
Machined and cast parts, molds, black or shiny metal
Artec Point II23.900 €
Also consider Artec Metrology Kit: Professional — holds 0.015 mm + 0.015 mm/m across large parts
Engine parts, castings, statues, limbs and torsos for orthotics
Artec Eva9.900 €
Car bodies, machinery, boats, plant equipment, aircraft sections
Artec Leo34.800 €
Also consider Artec Metrology Kit: Entry — keeps 0.125 mm + 0.025 mm/m over large parts
A transmission case, a pump housing, a compressor, a person and a whole car: from fine machined detail to large objects, each captured in one session. Spin any model and zoom in.
A ribbed metal casting with flanges, studs and mounting points. Every edge comes out sharp and ready to measure.
15–30min
Undercarriages and exhausts are scanned to design custom aftermarket exhaust systems. Data capture is up to 8× faster, and simple parts take half the time.
Scanned withArtec Leo
10min
Vessel components, engine rooms and dockyard cranes are scanned to plan repairs and refits where no CAD exists. A 16 m crane was captured on the first day.
Scanned withArtec Leo
50%
Real hydrangea petals are scanned as the basis for a floral jewelry collection, with no markers on the fragile petals. Flower to cast now takes 25 days instead of about a month.
Scanned withArtec Spider II
In our store, Artec Eva is 9.900 €, Spider II 27.000 €, Point II 23.900 €, Leo 34.800 € and Neo 35.100 €. Eva gives professional results at an entry-level price, while Neo and Point II are built for metrology-grade inspection and reverse engineering.
Premium Packs add five years of Artec Studio and a 5-year warranty, plus accessories such as batteries, a calibration kit or the Artec Turntable: Leo 48.750 €, Eva 19.585 € and Spider II 37.700 €. Schools and universities can request a quote for Education Packages with Leo, Eva or Spider II.
Start from object size and tolerance. Artec Spider II suits small parts with fine detail, Artec Neo and Point II tolerance-critical parts, Artec Eva medium objects and people, and Artec Leo large objects scanned on site.
Artec Spider II, Eva and Leo track geometry and texture, so no targets are needed. Artec Point II is target-based, and Artec Neo uses targets only where tolerances demand them, switching automatically within one scan.
Artec Point II reaches up to 0.02 mm, Neo 0.025 mm with targets, Spider II 0.05 mm, and Eva and Leo 0.1 mm. On large parts, Artec Metrology Kit keeps error from building up over distance.
Artec Leo has its computer, touchscreen and battery built in, so a computer is needed only for processing. Artec Neo has a built-in battery and Wi-Fi, with four batteries in the box. Artec Eva can run from a battery pack for up to 6 hours.
Yes. Data from all Artec scanners merges in one Artec Studio project, for example Neo or Spider II detail on top of a Leo scan of the whole object.
Artec Studio Pro handles scanning, processing, inspection and scan-to-CAD for every Artec handheld scanner. The Premium Packs for Leo, Eva and Spider II include five years of Artec Studio.
Yes. Leo’s invisible VCSEL light works outdoors in daylight, and Point II is rated IP50 and accurate from −10 to 40 °C. Neo is built for on-site inspection and MRO, and Eva with its battery pack and a tablet works in the field, at a dig site or at the bedside.
Yes. Leo captures up to 35 million points/s in a 160,000 cm³ capture zone, and users scan a whole car in about half an hour. On large parts, Artec Metrology Kit Entry keeps error from building up, so Leo reaches 0.125 mm + 0.025 mm/m.
