Long-range, mobile and handheld 3D scanners for as-built documentation, renovation and BIM, from building details to entire sites.
Accuracy, coverage speed and level of detail decide it. Many teams combine a site-scale scanner with Leo for close-up detail.
Facades, interiors, theaters, factory floors and structures for renovation and BIM
Artec Ray II€59,450
Stadiums, car parks, tunnels, bridges and building complexes, on foot or by vehicle
Artec Jet€38,500
Also consider Artec Twins — for georeferencing, merging and scan-to-BIM export
Ornaments, acoustic panels, steel members and rivets for made-to-fit replacements
Artec Leo€34,800
Capture, register and model in Artec Studio or Artec Twins, then hand off to BIM and CAD.
Walk, drive or fly the site with Jet, and set Ray II up where the highest accuracy matters. Ray II aligns each position on the spot.
Scan ornaments, connections and areas hidden from the tripod with Leo, wirelessly, from a lift or scaffolding if needed.
Artec Twins merges Jet, Ray II and Leo data into one dataset and georeferences it with ground control points.
Export point clouds and meshes for as-built documentation and scan to BIM, or check what was built against the design.
A concert hall, an underground car park, a tunnel, a church façade and a castle: buildings and sites captured as-built. Explore any of them.
An elaborate building exterior in a busy city center, captured with a backpack.
5h
Ray II captured the whole venue from 40 positions, from ceilings 20–30 m away to ornate carvings up close, replacing months of manual measuring.
Scanned withArtec Ray II
30min
Jet captured the stadium inside and out, in color, from a backpack and a vehicle, short enough to fit between games. The scoreboard was captured from ground level.
Scanned withArtec Jet
4h
Over 100 m of irregular wall paneling was scanned with Leo from scaffolding. The fused mesh fed parametric CAD for precisely fitted replacement aluminum panels.
Scanned withArtec Leo
A terrestrial laser scanner stands on a tripod and measures everything around it. Artec Ray II covers 360° × 300° from each position, 0.5 to 130 m away, with 1.9 mm accuracy at 10 m, and its scans arrive already aligned. It suits facades, interiors, structures and renovation work where accuracy drives the design.
A mobile LiDAR scanner maps while it moves. Artec Jet works handheld, on a backpack, on a vehicle or on a drone, at ±10 mm indoors and ±15 mm in general environments, in darkness and without GPS. Car parks, tunnels and building complexes are captured in minutes: a 6,700-seat stadium took 30 minutes inside and out.
A handheld scanner such as the wireless Artec Leo resolves ornaments, steel connections and fit-out details at 0.1 mm, even from a lift or scaffolding. Many teams combine a site-scale scanner with Leo. In our store, Ray II is €59,450, Jet is €38,500 and Leo is €34,800.
Artec Ray II when accuracy matters most: 1.9 mm at 10 m, with scans aligned on site. Artec Jet when you need a whole site fast, on foot, by vehicle or by drone. Many teams combine them and add Leo for close-up detail.
Ray II is a tripod-mounted terrestrial laser scanner that gives maximum accuracy in focused areas. Jet is a SLAM mapper that captures entire sites while moving, with ±15 mm accuracy in general environments. Data from both merges in Artec Twins.
Yes. Artec Twins supports as-built documentation, scan to BIM export and checking what was built against the design. Jet exports LAS, LAZ, PLY and E57 point clouds.
No targets are needed: Ray II registers each position in real time, and Jet uses SLAM positioning that also works indoors and underground without GPS. For georeferencing, Jet supports GNSS/RTK accessories and ground control points.
Leo captures details the site scanners cannot resolve, such as ornaments, rivets and connections, at 0.1 mm accuracy. It is fully wireless, so it works from lifts, ladders and scaffolding.
Ray II and Leo scans are processed in Artec Studio, and Jet data in Artec Twins, which also merges Jet, Ray II and Leo scans into one model. Both are available as a yearly plan or a lifetime license.
Artec Twins processes and stores everything on your own PC, so you can work offline and keep full control of project data. It renders multi-billion-point datasets in real time, with no thinning or splitting.
