Handheld 3D scanners that replace plaster casting: capture residual limbs, feet and torsos in minutes, contact-free, for sockets, orthoses, braces and covers.
Eva is the workhorse for limbs and torsos. Leo frees you from the laptop. Spider II adds fine detail on small areas.
Residual limbs, feet, torsos, and the inside of casts and sockets
Artec Eva€9,900
Residual limbs, legs, torsos and full bodies, in clinics, wards or remote sites
Artec Leo€34,800
Small body areas, molds, sockets and finished 3D-printed devices
Artec Spider II€27,000
One digital workflow in place of plaster, whichever scanner you choose.
Capture the residual limb, foot or torso in minutes with live on-screen feedback. No plaster, no markers, no mess.
Artec Studio fuses the scans into a watertight model and compensates for small patient movements. The scan is stored for repeat devices.
Export STL or OBJ to your socket or orthosis design software, and mirror the healthy side where symmetry matters.
3D print the device or mill a positive, then scan the result to check it against the design.
A full body and a face: limbs, torsos and contours captured contact-free in minutes, the starting point for sockets and orthoses.
A standing person in four minutes, with a tablet and battery pack.
75%
Scanning residual limbs, molds and sockets replaced 8+ hours of plaster casting. Scan to fit takes about two weeks, and the scanner paid off in about two months.
Scanned withArtec Eva
120+
Healthy and residual legs are scanned, often on home visits by one person, to design symmetrical prosthetic covers. A scan usually takes under a minute.
Scanned withArtec Eva
≈95%
Residual-limb scans replace plaster casting and train an AI model that designs prosthetic sockets, automating the corrections common to most patients and saving hours of manual CAD work.
Scanned withArtec Leo
For custom foot orthoses and insoles, a handheld 3D scanner replaces plaster casting with a digital model of the foot. Artec Eva captures a foot in minutes, contact-free and in full color, at up to 0.1 mm accuracy, with nothing stuck on the skin, and Artec Studio compensates for small movements.
Export the model as STL or OBJ to your orthotic design software, or straight to milling and 3D printing; it stays on file for repeat devices. Spider II then checks finished 3D-printed devices against the design at 0.05 mm.
Unlike a foot scanner you stand on, Eva moves around the patient, so the same device also scans legs and torsos for orthoses and residual limbs for prosthetics.
Prosthetists scan the residual limb instead of casting it. One workshop that replaced 8-hour plaster casting with minutes of scanning cut the time per device by up to 75% and paid off the scanner in about two months.
Eva also scans the inside of casts, molds and sockets, and Leo works around the patient with no laptop. Residual-limb scans can even feed AI design tools: one team trained a model on them that automates about 95% of socket mold corrections.
In our store, Eva is €9,900, Leo is €34,800 and Spider II is €27,000. The Eva Premium Pack adds a battery, a hard case, five years of Artec Studio and a 5-year warranty.
Artec Eva covers most O&P work: residual limbs, feet and torsos, plus the inside of casts and sockets. Artec Leo does the same fully wireless, with its own screen. Artec Spider II adds 0.05 mm detail for small areas and for checking finished parts.
Workshops report capturing a limb in minutes where plaster casting took hours, and cutting time per device by up to 75%. Scans are stored digitally, so there are no plaster positives to keep and data can be reused for repeat devices.
Yes. Prosthetists use Eva to scan the inside of casts, molds and sockets as well as the limb itself.
Scans take seconds to minutes, which suits children and elderly patients, and Artec Studio can compensate for small movements during capture.
Yes. Eva weighs under 1 kg and runs up to 6 hours on its optional battery with a tablet. Leo has its own battery, computer and screen, so no laptop is needed.
Artec Studio exports STL, OBJ or PLY for O&P design software, milling and 3D printing. Premium Packs include five years of Artec Studio.
Eva reaches up to 0.1 mm 3D point accuracy and Spider II 0.05 mm. In practice the result depends mostly on how still the patient holds the foot during the scan, which takes minutes.
Yes. Eva captures a torso in minutes instead of a plaster cast, and Leo lets you walk freely around a standing patient with no laptop. Export STL or OBJ to your brace design software.
